Technical data, Installation – Zanussi ZQF 11430 DA User Manual

Page 17

Advertising
background image

Problem

Possible cause

Solution

The product temperature is too high.

Let the product temperature decrease to

room temperature before storage.

Many products are stored at the same

time.

Store less products at the same time.

Products are too near to each other.

Store products so that there is cold air

circulation.

There is too much frost.

Food is not wrapped correctly.

Wrap the food correctly.

The door is not closed correctly.

Refer to "Closing the door".

The temperature regulator is not set

correctly.

Set a higher temperature.

Closing the door

1. Clean the door gaskets.
2. If necessary, adjust the door. Refer to "Installation".

3. If necessary, replace the defective door gaskets.

Contact the Service Center.

Technical data

Dimension

Height

815 mm

Width

560 mm

Depth

550 mm

Rising Time

29 h

Voltage

230-240 V

Frequency

50 Hz

The technical information are situated in the rating plate

on the internal left side of the appliance and in the energy

label.

Installation

Caution! Read the "Safety Information" carefully for

your safety and correct operation of the appliance

before installing the appliance.

Positioning

This appliance can be installed in a dry, well ventilated in-

door (garage or cellar) also, but for optimum performance

install this appliance at a location where the ambient tem-

perature corresponds to the climate class indicated on the

rating plate of the appliance:

Climate

class

Ambient temperature

SN

+10°C to + 32°C

N

+16°C to + 32°C

ST

+16°C to + 38°C

T

+16°C to + 43°C

17

Advertising