Rollei AFM 35 - Manual (Page 14)

Practical Hints
[Return to Manual index] [Previous page] [Next page]
7. Pre-selecting apertures
According to the type of subject you can line up the
matching pointer 17 with the meter needle by turning
either the aperture dial 5 or the shutter speed dial 1.
With moving subjects pre-select the exposure time to
make sure of a suitably fast shutter speed Then match up
the pointer by turning the aperture dial.
If on the other hand depth of field is more important (see
hint 8 ), determine the required aperture and preselect this
Now match up the pointer 17 by turning the shutter speed
dial 1. If necessary complete the exact matching with the
aperture dial 5 to get a speed value in clickstop position.
In every case the camera must point at the subject while
you line up the pointer.
[Return to Manual index] [Previous page] [Next page]
All this informations, texts, and Images were extracted from the "Rollei 35/35T/35S In Practical Use" and
only intends to give some orientation to new users that didn't had access to the original manual. (c)
Rollei-Werke Franke & Weidecke