Revolutionary Cooling Systems PVP2800 - Manual (Page 18)

If you are monitoring your inverter from a remote location (see figure 15):
1) Select Client under Remote Mode.
2) Select an available Com port (this may be selected automatically for you).
3) Under Remote Server (Client Mode) enter the IP Address and Port of the host
Server (noted above).
4) Click on Apply.
Figure 13: Communication Setup Figure 14: Communication Setup
Dialog screen in Local mode. Dialog screen in Server mode.
Figure 16: PVP Command Center Main Screen
PV Powered LLC 17 18-28-405
Figure 15: Communication Setup Dialog
screen in Client mode.