Regency G36D - Manual (Page 16)

UltraGlow ® G36D Zero Clearance Direct Vent Gas Fireplace ® ® 16
RIGID PIPE VENTING ARRANGEMENTS - VERTICAL TERMINATIONS
(Propane & Natural Gas)
The G36D is approved for a maximum 23 ft. (7.0m) vertical, with a maximum 12 ft. (3.7m) horizontal offset
using two 90 o elbows (two 45 o elbows equal one 90 o elbow) with Rigid Pipe vent systems for Propane and
Natural Gas, as per diagram 1.
The G36D is approved for a maximum 37 ft. (11.3m) straight vertical, including a maximum 20" (0.5m) horizontal
offset using two 90 o elbow (two 45 o elbows equal one 90 o elbow) with Rigid Pipe vent systems for Propane
and Natural Gas, as per diagram 2.
• Vent must be supported at offsets
• Maintain clearances as listed in the"Clearances" section.
• Firestops are required at each fl oor level and whenever passing through a wall.
Note: Must use optional rigid pipe adaptor when using rigid vent systems (Part # 510-994).
Note: UltraGlow ® Note: UltraGlow Note: UltraGlow Direct Vent System (Flex) is only approved for horizontal terminations. ® ®
Diagram 1
Diagram 2
INSTALLATION