Renesas M32182T2-PTC - Manual (Page 6)

( 4 / 7 )
5.2 For the M32100T-SDI-E and M32170T-SDI
(1) Mount the NQPACK144SD.
(2) Mount the YQPACK144SD on the NQPACK144SD.
(3) Secure the four corners of the YQPACK144SD with the
YQ-GUIDE's.
(4) Set the clock select switch.
(5) Mount the M32182T2-PTC on the YQPACK144SD.
(6) Mount the M3T-PTC-CNV on the M32182T2-PTC.
(7) Connect the probe of the emulation pod and the
M32182T2-PTC via the SDI MCU control interface
cable and the SDI trace interface cable.
Figure 3 Connection to the M32100T-SDI-E or M32170T-SDI
: Position of No. 1 pin
Be sure to match the position of No. 1 pin of the foot pattern
and each part.
Connection to the M32100T-SDI-E or M32170T-SDI