Ryobi P540 - Manual (Page 26)

6
PROBLEM cAUSE SOLUTION
Bar and chain running hot
and smoking.
Motor runs, but chain is not
rotating. 1. Check chain tension for over
tight condition
. Chain oil tank empty.
1. Chain tension too tight.
. Check guide bar and chain
assembly.
3. Check guide bar and chain
for damage.
1. Tension chain. Refer to chain Tension
earlier in this manual.
. Check oil tank.
1. Retension chain, Refer to chain Tension
earlier in this manual.
. Refer to Assembling the Bar and chain
earlier in this manual.
3. Inspect guide bar and chain for
damage.
TROUBLESHOOTING
CALL
1-800-860-4050
www.ry
obitool
s.com
CALL us fIRsT
For any questions about operating or maintaining your product,
call the Ryobi
®
Help Line!
Your product has been fully tested prior to shipment to ensure
your complete satisfaction.