RCA PRO-LS100 User Manual
Page 3
3
3. Press the speaker’s black negative (–)
terminal tab and insert one of the bare
wire ends into the opening. Then
release the tab.
4. Press the speaker’s red positive (+)
terminal tab and insert the other bare
wire end into the opening. Then
release the tab.
5. Using the speaker wire’s coding as a
guide, connect the other end of the
speaker wire to the amplifier’s
corresponding (right or left) speaker
terminals.
C
C
C
Ca
a
a
arrrre
e
e
e
Keep the speaker dry; if it gets wet, wipe it
dry immediately. Use and store the
speaker only in normal temperature
environments. Handle the speaker
carefully; do not drop it. Keep the speaker
away from dust and dirt, and wipe it with
a damp cloth occasionally to keep it
looking new.
Modifying or tampering with the speaker’s
internal components can cause a
malfunction and might invalidate its
warranty.
Caution: You might permanently damage
your speaker by cleaning it with a vacuum
cleaner. Use a feather duster or a soft loose
cloth instead.
T
T
T
Trrrro
o
o
ou
u
u
ub
b
b
blllle
e
e
essssh
h
h
hoo
oo
oo
oottttiiiin
n
n
ng
g
g
g
This speaker has been manufactured to the
specifications of RadioShack and is
covered by a limited warranty from
RadioShack. If your speaker is not
operating as it should, take it to your local
RadioShack store or call 1-800-THE-
SHACK for assistance.