Rose electronic CRYSTALVIEW PRO CAT5 - Manual (Page 19)

CRYSTALVIEW PRO CAT5 INSTALLATION AND OPERATINS MANUAL
15
A. 1- Connect the appropriate CPU cable to the keyboard, video
monitor and mouse ports on the CPU and to the
corresponding ports on the transmitter.
2- Connect the transmitter to the receiver with up to 1,000 feet of
CAT-5 cable.
3- Connect the KVM stations keyboard, video monitor, and
mouse cables to the corresponding connectors on the
receiver unit.
B. 1- Connect the appropriate CPU cable to the keyboard, video
monitor and mouse ports on the CPU and to the appropriate
CPU connector on the switch.
2- Connect the appropriate KVM cable from the KVM port on the
switch to the corresponding connectors on the transmitter.
3- Connect the transmitter to the receiver with up to 1,000 feet of
CAT5 cable.
4- Connect the KVM stations keyboard, video monitor, and
mouse cables to the corresponding connector on the
receiver unit.
C. 1- Connect the appropriate CPU cable to the keyboard, video
monitor and mouse ports on the CPU and to the appropriate
CPU connector on the switch.
2- Connect the appropriate KVM cable from the KVM port on the
switch to the corresponding connectors on the transmitter.
3- Connect the transmitter to the receiver with up to 1,000 feet of
CAT5 cable.
4- Connect the appropriate CPU cable from the CPU port on the
switch to the corresponding connectors on the receiver
5-Connect the KVM stations keyboard, monitor, and mouse
cables to the corresponding connector on the receiver unit.
Transmitter to Receiver cabling
Cable type Maximum distance
CAT-5 1,000’ / 300m
Table 1.transmitter to receiver cabling