Roku SoundBridge Radio Wi-Fi Music System - Manual (Page 68)

66
2. Use Right/Left [34] to find letters, number and spaces in the Wi-Fi network name and
then press Select for each letter, number and space you choose.
3. Use Up/Down [56 ] for “OK,” spaces, delete, commas, periods, accent letters, numbers
and uppercase or lowercase letters.
Entering a Security Key
If you have a security key, you will need to enter your WEP [Wired Equivalent Privacy (802.11
encryption protocol)] key. This is the same key you entered into your Access Point and your
computer. To find more information about your Access Point, see “Appendix 2: “Wi-Fi Access
Point Password.”
As of this writing, the SoundBridge Radio software is version 2.5 and does not support “WPA”.
Check for software updates if you need this feature.
Troubleshooting Wi-Fi Setup
If you have problems connecting the SoundBridge Radio to your music library, please check the
following:
1. Is SoundBridge Radio powered on (is the screen lit)?
2. Is SoundBridge Radio within range of your wireless network signal? (Performance varies
depending on wireless network hardware, physical barriers such as walls, and signal
interference.)
3. Is your computer on and is your Wi-Fi access point plugged in?
4. Is your music server software running on your computer? Are your music sharing options
enabled? (See “Enabling Music Sharing” in the “Getting Started” chapter.
5. If you have a password, did you enter it correctly, including case sensitive characters?
6. Is your wireless access points (WAP) compatible with SoundBridge Radio? For a list of
compatible Wi-Fi access points that Roku has tested, please visit www.rokulabs.com/
support.
Section 13: Appendices Section 13: Appendices