Radio Shack 25-3090 - Manual (Page 4)

In
stalling the
Fax/Modem
4
(Recommended) and Specify a location .
Enter F:\WinME where F is the CD drive.
6. Click Next . The following screen
appears.
7. Verify the driver location and click Next .
Windows ME automatically copies the
driver and related files to the computer.
The following screen appears.
8. Click Finish . The orange PW indicator
on the fax/modem lights, indicating it is
ready to use.
9. You can use your existing fax/modem
program or the supplied SuperVoice
software to send fax, email, or surf the
Internet. (See “Installing SuperVoice”
on Page 7.)
9 +0&195 :2
1. Turn on your computer.
2. Flip up the phone line jack cover on the
fax/modem and with locking tab facing
up, insert one end of the supplied RJ-11
cable plug into the phone line jack until
it clicks. Connect the other end to the
telephone line wall jack.
3. Connect the fax/modem’s USB plug to
your computer’s USB port, using the
supplied USB extension cable if
necessary. Windows XP recognizes the
device and the Found New Hardware
Wizard screen appears.
4. Insert the supplied driver installation CD
and select Install from a list or specific
location (Advanced).
5. Click Next . The following screen
appears.
6. Select Search for the best driver in these
locations and Include this location in the
search . Enter F:\WINXP (where F: is the
CD-ROM drive).
7. Click Next . Windows XP searches and
recognizes the device’s driver, then the
Hardware Installation screen appears.