Assembling lid handle, Assembling side handles/legs, How to assemble your electric skillet – Rival S12P User Manual

Page 4: Remove all parts from the packaging

Advertising
background image

-4-

Remove all parts from the packaging.

ASSEMBLING LID HANDLE

1. Find lid and lid handle.
2. Holding LID HANDLE on the outside

top of LID, align holes in lid handle
into holes located on the outside of
the lid. Handle should be centered
over glass in the lid.

3. Place the phillips head screws

through screw holes on the inside
of the lid (2 places).

4. Tighten screws until snug. Screws

should be seated flush against lid
surface. The lid is now ready for use.

ASSEMBLING SIDE HANDLES/LEGS

1. Place pan upside down on table.
2. Find one SIDE HANDLE/LEG and mount on the pan side where the probe

connects to the pan.

3. Align screw holes in SIDE HANDLE/LEG over the screw posts on pan

(2 places per handle).

4. Insert screws (2 per handle) through holes in bottom of SIDE HANDLE/LEG

and align screws in holes in the pan.

5. Tighten screws with a screwdriver until snug. Screws should be seated

flush against handle.

6. Repeat steps 3 through 5 with the other SIDE HANDLE/LEG.
7. Once both handles are tightened securely, place skillet upright onto its

legs. Assembly is complete.

CAUTION: Do not operate skillet prior to assembly of SIDE HANDLES/LEGS
and LID HANDLE.

IMPORTANT
Check the side handles/legs of your skillet periodically for looseness. If needed,
re-tighten with a screwdriver. CAUTION: Overtightening can result in stripping
of screws or cracking of handles and base.

HOW TO ASSEMBLE YOUR ELECTRIC SKILLET

RIVAL

Elec

tric

Skil

let

Advertising