Ryobi D41K - Manual (Page 8)

 − English
FEATURES
PRODUCT SPECIFICATIONS
Chuck Capacity ....................................... 1/16 in. to 3/8 in.
Switch ............................. VSR ( Variable Speed Reversible)
No Load Speed .................................0-1,600 r/min. (RPM)
Input ...................................... 120 V, AC only, 60 Hz, 4.5 A
Net Weight .............................................................. 3.8 lbs.
keyless
chuck
DIRecTION OF
ROTATION selecTOR
(FORWARD/ReVeRse/
ceNTeR lOck)
lOck-ON
BuTTON
leVel leVel
KNOW yOUR DRILL
See Figure 1.
The safe use of this product requires an understanding of
the information on the tool and in this operator’s manual as
well as a knowledge of the project you are attempting. Before
use of this product, familiarize yourself with all operating
features and safety rules.
DIRECTION OF ROTATION SELECTOR
(FORWARD/REVERSE/CENTER LOCK)
Your drill has a direction of rotation (forward/reverse/center
lock) selector located above the switch trigger for changing
the direction of bit rotation. Setting the switch trigger in the
OFF (center lock) position helps reduce the possibility of
accidental starting when not in use.
KEyLESS CHUCK
The keyless chuck allows you to hand-tighten or release the
drill bit in the chuck jaws.
LEVELS
Levels are located on the top and end of the motor
housing to help keep the drill bit level during use.
LOCK-ON BUTTON
The lock-on button is convenient for continuous drilling for
extended periods of time.
VARIABLE SPEED
The variable speed switch trigger delivers higher speed
with increased trigger pressure and lower speed with
decreased trigger pressure.
sWITch
TRIGGeR
Fig. 1