Raritan Computer COMMANDCENTER NOC - Manual (Page 70)

58 COMMANDCENTER NOC ADMINISTRATOR GUIDE
The Windows Management Configuration Wizard is an interface to specify and configure proxy
hosts, which facilitate connectivity between the CC-NOC and your managed Windows servers
and workstations. This configuration wizard walks you step-by-step through the creation of
proxies, association of authentication information with specific domains, and the ability to
associate authentication information with specific hosts as well.
1. Click on the Admin tab in the top navigation bar.
2. Click Windows Management Configuration.
3. Click Windows Management Configuration Wizard.
4. Click start configuration to launch the wizard.
Figure 71 Configure an External Proxy for Windows Management
5. Click add new external proxy.
Note: To access the Windows Management Configuration Wizard in a distributed environment,
that is, from a CommandCenter 2500N, in the navigation tab bar at the top click on the Admin
tab, then CC-NOC 2500M Configuration. Click CommandCenter NOC 2500M Configuration
Wizard or click configure next to the appliance you are currently configuring.
Identifying Local Proxy
The local proxy host specified here will be central to communications with some subset (or all) of
your managed Windows platforms, allowing the CC-NOC to request information from a
particular server or workstation, which this proxy will then translate into a Microsoft proprietary
protocol and pass on to the end system.
Note: This step is required only if using an external proxy. If you are using a CC-NOC 2500M,
you can use its own internal proxy.
Figure 72 Specifying proxy host information