Roland RG-3 User Manual
Page 87
Advertising
85
Chapter 5. User Program Registration
7.
Press the [Enter] button.
8.
Press the [Song] (Select -) button or [
] (Select +) button so that
the “load User Program Set number” is flashing.
fig.05-210d
9.
Press the [
] (Value -) button or [
] (Value +) button to
select the number for the User Program Set to be loaded.
10.
Press the [Enter] button.
A confirmation message appears in the screen.
fig.05-220d
To return to the original screen without loading the User Program, press the
[Function] (Exit) button.
11.
Press the [Enter] button once more.
The selected User Program Set is loaded to the RG-3.
NOTE
When calling up User
Programs saved in USB
memory, do not remove the
USB memory from the Ext
Memory port until the
settings have been called up.
Advertising