Adding reverberation to the sound (reverb), Adding richness to the sound (chorus), Playing two sounds layered together (dual) – Roland HPi-5 User Manual

Page 25: Adds reverberation to the sound. (p. 25), Adds spaciousness to the sound. (p. 25)

Advertising
background image

25

Adding Variety to Your Performances

Adding reverberation to the sound (Reverb)

By applying the reverb effect you can produce a pleasant reverberation, making it sound as though you
were performing in a concert hall.

1

Press the [Reverb] button.

The button’s indicator will light, and a reverb effect will be applied to the sound.
To cancel the reverb effect, press the [Reverb] button, getting its indicator to go dark.

*

It is not possible to memorize the reverb effect setting for each sound.

Adding richness to the sound (Chorus)

By applying the chorus effect you can make the sound richer and more spacious.

1

Press the [Chorus] button.

The button’s indicator will light, and a chorus effect will be applied to the sound.
To cancel the chorus effect, press the [Chorus] button, getting its indicator to go dark.

*

The chorus setting can be memorized for each sound.

The depth of the reverb effect and chorus effect can be adjusted. Refer to “Adjusting the depth of the effects

(Effects)” (p. 43).

Playing Two Sounds Layered Together (Dual)

Simultaneously playing two sounds when one key is pressed is called “dual performance.”

1

Simultaneously press two of the [Tone] buttons.

Both of the button indicators will light. Of the two buttons, the sound of the left button will be “Tone
1,” and the sound of the right button will be “Tone 2.”

fig.dual.e

When the tone names of “Tone 1” or “Tone 2” are highlighted, you can press the [

] or [

] button

to select tones within the same tone group (

p. 24).

When “Dual Balance” is highlighted, you can press the [

] or [

] button to adjust the volume

balance between the two selected tones.

To cancel dual performance, press any [Tone] button.

Dual Balance
Displays the volume ratio of
the two selected tones.

Return to the
previous screen

Tone 1
Displays the tone name for
the left Tone button that is
selected.

Tone 2
Displays the tone name for
the right Tone button that is
selected.

Select the item to set
The selected item will be
highlighted in white.

Change the tone,
change the Dual Balance

HPi-5_e.book 25 ページ 2004年12月21日 火曜日 午後12時46分

Advertising