Radio Shack 15-1915B - Manual (Page 2)

Need help? Call 1-800-950-7557
2
INTRODUCTION
Your RadioShack Pocket Remote Control can re-
place up to three standard infrared remote con-
trols.
Unlike some universal remote controls, the Pock-
et Remote is preprogrammed and does not have
to learn its commands from the original remote
controls. All you have to do is tell the Pocket Re-
mote which remote controls you want it to replace
(by entering 4-digit codes), and the Pocket Re-
mote does the rest. It’s as simple as A-B-C.
This manual includes a list of 4-digit manufactur-
ers’ codes for TVs, VCRs, and cable converters.
After you’ve entered the 4-digit manufacturers’
codes for your original remotes, the Pocket Re-
mote is automatically ready to operate most of the
same functions as the original remotes.
Your Pocket Remote’s features include:
Replaces Other Remotes — lets you replace up
to three remote controls with one easy-to-use re-
mote control.
Powerful Infrared Beam — in many cases, lets
you operate your remote-controlled devices from
a greater distance than with the original remote
controls.
Convenient Keypad Design — places each
control key in the best position for easy operation.
Handy Reference Label — provides a conve-
nient place for you to write down the manufactur-
ers’ codes for your devices.
Toll Free Support — you can get expert help for
your Pocket Remote by calling 1-800-950-7557.
© 1997 Tandy Corporation.
All Rights Reserved.
RadioShack is a registered trademark used by
Tandy Corporation.
X-10 is a registered trademark of X-10 (USA) Inc.
15-1915b.fm Page 2 Monday, July 19, 1999 12:06 PM