Tn-202, Testing your gps using your pda – Rayming TN-202 User Manual
Page 9
PAGE 9 OF 15
TN202-UG V1.2
TN-202
3. TESTING YOUR GPS USING YOUR PDA
The included “GPS Information” test program only supports the Microsoft Windows CE & Pocket PC based PDA
platforms. From you laptop or local PC, run the “GPSinfo.exe” to execute the installation procedure of GPS test
program. You will then transfer the program to your PDA using your personal sync program such as ActiveSync
from Microsoft (http://www.microsoft.com/mobile/pocketpc/downloads/activesync35.asp).
1. Insert the TN-202 into your PDA.
2. Run the GPS test program from “Start → Program files” of the PDA. You can then see the results for detecting
the COM port that the TN-202 is using and to check the GPS output data.
DESCRIPTION OF “GPS INFORMATION” TEST PROGRAM:
1. User must select COM port (CF_CARD-GENERIC)
2. Baud Rate (4800)
3. Click on the [Start GPS] button to start receiving GPS data.
Image 6: GPS data & COM port set-up screen