Roberts Radio cr9980 - Manual (Page 11)

If you need any further advice, please call our Technical Helpline on :-
020 8758 0338 (Mon-Fri)
11
Storing stations in memory
1. Tune in the radio to the required station.
2. Press the Memory button. The Memory indicator will flash on the
display.
3. Select the required memory position by using the F.skip/Mem. Up or
B.skip/Mem. Down buttons. The position number will show on the
display.
4. Store this station by pressing the Memory button.
5. Repeat the above steps until you have programmed all your favourite
stations (maximum 15 stations for FM and 15 stations for MW) into
the memory.
6. Use the F.skip/Mem. Up or B.skip/Mem. Down buttons. to cycle
through your programmed stations to listen to them at any time whilst
in radio mode.
1
2
3 3
4
6 6
cr9980 instruction book1.PMD 1/14/2005, 12:36 PM 11