Ryobi D41 - Manual (Page 8)

8 9
FEATURES
Fig. 1
PRODUCT SPECIFICATIONS
Chuck Capacity....................................... 1/16 in. to 3/8 in.
Switch ............................. VSR ( Variable Speed Reversible)
No Load Speed ..............................................0-1,600/min.
Input ............................... 120 V, 60 Hz, AC only, 4.5 Amps
Net Weight.............................................................. 3.8 lbs.
SWITCH
TRIGGER
DIRECTION OF
ROTATION SELECTOR
(FORWARD/REVERSE/
CENTER LOCK)
KEYLESS
CHUCK
LOCK-ON
BUTTON
LEVEL
LEVEL
CORD
KNOW YOUR DRILL
See Figure 1.
Before attempting to use this product, familiarize yourself
with all operating features and safety rules.
DIRECTION OF ROTATION SELECTOR
(FORWARD/REVERSE/CENTER LOCK)
Your drill has a direction of rotation (forward/reverse/center
lock) selector located above the switch trigger for changing
the direction of bit rotation. Setting the switch trigger in the
OFF (center lock) position helps reduce the possibility of
accidental starting when not in use.
KEYLESS CHUCK
The keyless chuck allows you to hand-tighten or release the
drill bit in the chuck jaws.
LEVELS
Levels are located on the top and end of the motor
housing to help keep the drill bit level during use.
LOCK-ON BUTTON
The lock-on button is convenient for continuous drilling for
extended periods of time.
VARIABLE SPEED
The variable speed switch trigger delivers higher speed
with increased trigger pressure and lower speed with
decreased trigger pressure.