RCA CC6151 - Manual (Page 70)

68
Optional Accessories
Cautions: Before using a tripod, make sure
it is stable enough to hold the camcorder
without falling over. Do not transport the
camcorder attached to the tripod.
When attaching your camcorder to a tripod,
be careful not to force the tripod screw into
the camcorder’s tripod mounting hole.
The tripod screw should not protrude into the
camcorder more than approximately three-
eighth (3/8) inch. Forcing the screw could
damage the mounting hole on the bottom of
the camcorder.
All specifications and descriptions
of accessories are subject to change
without notice.
FB1260 and FB120 Rechargeable
Batteries
These rechargeable nickel-cadmium
batteries are designed specifically for long
life. The FB1260 is a 1-hour battery. The
FB120 powers your camcorder twice as
long as the FB1260 (depending on how
much you use zoom and pause). Both can
be recharged with the AC adapter/charger
that came with your camcorder.
CPS91 AC Battery Charger
The CPS91 battery charger plugs directly
into an AC outlet and charges the FB1260
and FB120 camcorder batteries. Because
the CPS91 operates on 100-240 Volts,
50/60 Hz, it can be used virtually
anywhere in the world. A plug adapter
might be required in some countries.
Charging takes approximately seven
hours for the FB1260 (1-hour battery)
and 13 hours for the FB120 (2-hour
battery).
Mounting the camcorder on a tripod, such
as AC088, keeps the camcorder steady
and produces excellent video results.
This tripod’s fluid-effect head provides
smooth camera pan and tilt. The quick-
release mount makes it easy to attach or
remove the camcorder. The grooved,
tubular 3-section leg design folds down to
26" when not in use. Rubber feet allow
for sure footing.
Using the Optional AC088 Tripod
CHARGE
1/1000
AUTO
MA N
HAZE SH DW
P U S H
SEPIA
FR ON TLIG HT
B A C KLIG HT FADE TITLE
SP/SLP DA TE/TIME COUNTER QU ICK RE PA LY/ PA US E