Troubleshooting – Rosen Entertainment Systems Rear Observation System Package RVMPKG1 User Manual

Page 10

Advertising
background image

10

Occasionally clean the surface of the mirror with a soft cloth moistened with water or
window cleaner.

Troubleshooting

Table 1 Rearview Mirror

Symptoms

Solutions

The ON/OFF signal light <E> is not
on after the car is started?

1. Check the installation-wiring diagram.
2. Ensure that the parallel red and black line

from the control box is connected
properly.

3. Check for 12 volts on the blue wire while

Ign on.

No video signal appears while

reversing the car?

1. Check the LCD Contrast (Brightness)

control knob whether the contrast knob is
set too low.

2. Check the rearview Camera lens.
3. Check the rearview Camera wiring and

connection.

4. Check the cable from the rearview mirror

is connected to the control box.

5. Check out the wire connection (to find out

whether the system’s reverse wire cable is
connected to the reverse switch gear of the
car)

Video image is not sharp enough??

1. Clean the lens of the camera.

Table 2 Hands Free Phone

Symptoms

Solutions

When the Hands Free Phone
Function is not working?

1. Check the volume control knob

whether the volume is set too low.

2. Check to see if the hands free cable

plug to the phone hand set input
jacket is properly connected.

3. Check whether the mobile phone

hands free cable plug is properly
connected to the control box.

Advertising