RocketFish RF-GPS31126 - Manual (Page 2)

Bottom view
Rocketfish RF-GPS31126 Bluetooth headset (1)
Charger (1)
USB charging cable (1)
Round earbuds (4) Ear loop (1)
Fitted earbuds Quick Setup Guide (1)
(medium size is pre-attached) (3)
1 Lift the charging port cover, then connect the charger.
When the indicator changes from red to green, you can
disconnect the charger.
Use one of the fitted earbuds for the most convenient and
comfortable fit, or use a round earbud in combination with
the ear loop.
To use a rounded earbud:
1 Remove the fitted earbud that’s
already attached, then press the
round earbud onto the headset.
2 Attach the ear loop for a secure fit.
3 Press and hold the headset’s power button for three seconds to turn
it on. It automatically enters pairing mode when you turn it on for
the first time. While in pairing mode, the headset’s LED flashes
green, and the PS3 finds and recognizes all Bluetooth devices
within its range. Your headset is recognized as RF-GPS31126.
4 When prompted for a pass key, enter “0000” (four zeros), then
highlight OK and press (×). The “Register completed” message
appears. You will then be taken to a new screen stating Register
completed. Press (
O), highlight Audio Device Settings, then
press (×). Within Input Device, highlight RF-GPS31126, press
(×), then set your headset. Then set your microphone input
levels to the desired settings (we suggest level 3). The headset is
now connected.
To turn off the headset, press and hold the power button for
about two seconds.
2 Turn off your PS3 using the rear MAIN POWER switch, leave it off
for about 10 seconds, then turn it back on. Press the front power
button. Find the Settings menu then press the (×) button on the
controller. Highlight the Register Bluetooth® Device icon, then
press (×). Highlight the Manage Bluetooth Devices icon, then
press (×). Select Yes to register a new device (if this is the first
time registering a Bluetooth device), then highlight Start
Scanning and press (×).
1 Power & Pair 2 Get the perfect fit What’s in the box:
LED light
Ear bud
Charging port
with cover
On/Off
(reverse side)
Volume
touch pad
Send/end button To use a fitted earbud:
1 Attach the appropriate size of fitted earbud
onto the headset. The medium fitted
earbud is already attached.
2 Insert the headset vertically in your ear
(shown in Step 2).
3 Rotate the headset up towards your mouth.
The flexible portion of the earbud should fit
securely towards the back of your outer ear.
You may need to guide it to a comfortable
position with your finger.
Ear loop Round earbuds Fitted earbuds
Charger
Headset
LED light
What is PureSpeech®?
PureSpeech is a state-of-the-art noise cancelation and signal processing technology created by SRS Labs and CSR. Your RF-GPS31126
headset incorporates PureSpeech so that you can hear your calls in amazing clarity, but also so you can be heard clearly by your callers.
PureSpeech is always activated on the RF-GPS31126 so you will hear and be heard like never before.