RocketFish RF-GUV1201 - Manual (Page 24)

24
9 Slide the Speaker and Wave sliders to the maximum
settings. These settings determine the volume of the chat
you hear. You can use the CHAT VOLUME control on the
in-line control unit to adjust the chat volume.
10 Slide the Microphone slider to adjust the microphone
volume. This setting determines the volume of your voice
that you hear in the headphone when you speak into the
microphone. If the microphone volume is too low or too
high, readjust the slider.
11 Click the X in the upper right corner of the dialog box to
close the box.
12 Open the Sounds and Audio Devices Properties box again.
13 In the Sound Recording list, select Rocketfish Headset,
then click the Volume button. The Master Volume dialog box
opens.
14 Slide the Mic Volume slider to the middle setting. This
setting determines the volume of your voice that others hear
when you speak into the microphone.
15 Click the X in the upper right corner of the dialog box to
close the box.
16 Position the microphone several inches away from your
mouth so it does not overload when you speak. Try to
balance the microphone position and the volume setting for
optimum voice level.