RCA VR336 - Manual (Page 8)

6
Hooking Up the VCR
Connecting Two VCRs for Copying Tapes
OUT TO
TV
IN FROM
ANT.
CH
3
5 6 4 AUDIO
VIDEO
IN OUT
OUT TO
TV
IN FROM
ANT.
CH
3
5 6 4 AUDIO
VIDEO
IN OUT
Playback VCR
RF Coaxial Cable
(supplied)
Recording VCR
Audio/Video
Cables
RF Coaxial
Cable
or
Use the hookup to the TV
as previously selected on
pages 3, 4, or 5.
From Antenna, Cable
or Cable Box
Audio/Video
Cables
From Antenna, Cable
or Cable Box
OUT TO
TV
IN FROM
ANT.
CH
3
5 6 4 AUDIO
VIDEO
IN OUT
OUT TO
TV
IN FROM
ANT.
CH
3
5 6 4 AUDIO
VIDEO
IN OUT
Playback VCR
Recording
VCR
Audio/Video
Cables
RF Coaxial
Cable
or
Use the hookup to the TV
as previously selected on
pages 3, 4, or 5.
Option A Hookup.
Use this hookup for a basic connection which
requires fewer accessories.
1 . Select a hookup from pages 2 through 5
and then modify with this connection.
2 . Set the CH 3 5 56 64 switch on the playback
VCR to either channel 3 or 4.
Tune the recording VCR to this channel to
receive the signal from the playback VCR.
3 . Connect as shown.
4 . Plug in power cords of VCRs and TV.
5.
Option B Hookup.
Use this hookup for slightly improved
picture quality and more convenient
operation — use of TV•VCR button is not
required.
1 . Select a hookup from pages 2 through 5
and then modify with this connection.
2 . Connect as shown.
This connection requires additional accessories
not provided. A Y-adapter may be required to
hear sound from both channels if your other
VCR is stereo.
3 . Plug in power cords of VCRs and TV.
4.
Select the LINE (audio/video) input on the
recording VCR to receive the signal from
the playback VCR.
Go to “Startup” section.
Go to “Startup” section.
B
A
Caution: The unauthorized recording of
television programs and other materials
may infringe the rights of others.