Rimage 110705-000 - Manual (Page 12)

2. Open your label application and open your label file.
3. Select
Print within the application. (The Rimage CD Designer application's File | Print
function is used in the sample screen below.)
4. Set the printer name to Disc Color Printer if that is not the default printer.
5. Set the number of copies if necessary, and then select OK . The Liberty printer Power LED
will flash within a few seconds, and the printer tray comes out.
6. Place the disc you want to print on the printer tray so that the printable surface is facing
up. The three holding pins must come up through the disc center hole.
1 – Printer Tray 2 – Disc 3 – Holding Pins
12