Renesas RJJ10J1643-0101 - Manual (Page 109)

Rev.1.01 2007.02.16
RJJ10J1643-0101 107
(Interrupt) If overflow interrupt requests are enabled, specify RAPI_OVERFLOW. If
input capture A, input capture B, input capture C, or input capture D interrupt
requests are enabled, specify RAPI_INPUT_CAPURE_A,
RAPI_INPUT_CAPURE_B, RAPI_INPUT_CAPURE_C, or
RAPI_INPUT_CAPURE_D, respectively. When not specifying interrupts,
select “No interrupt requests.”
(Counter
clear)
To specify GRA, GRB, GRC, or GRD input capture for the cause for which
the counter is cleared, select RAPI_COUNT_CLEAR_A,
RAPI_COUNT_CLEAR_B, RAPI_COUNT_CLEAR_C, or
RAPI_COUNT_CLEAR_D, respectively. If cleared at the same time a
synchronously operating counter on another channel is cleared, select
RAPI_COUNT_CLEAR_SYNC.
(Synchronizati
on)
If timers on channels 0 and 1 are to be synchronized, select
RAPI_TIMER_SYNC. When not specifying synchronization, select
“Channels 0 and 1 operate independently.”
(Clock for
digital filter)
Specify one from [RAPI_TRD_FILTER_F1, RAPI_TRD_FILTER_F8,
RAPI_TRD_FILTER_F32, RAPI_TRD_FILTER_F]. The default is
RAPI_TRD_FILTER_F32.
(H8/300H)
RAPI_TIMER_W Uses timer W.
RAPI_TIMER_Z0 Uses timer Z channel 0.
RAPI_TIMER_Z1 Uses timer Z channel 1.
RAPI_TIMER_RC Uses timer RC.
RAPI_TIMER_RD0 Uses timer RD0 channel 0.
RAPI_TIMER_RD1 Uses timer RD0 channel 1.
RAPI_TIMER_RD2 Uses timer RD0 channel 2.
RAPI_TIMER_RD3 Uses timer RD0 channel 3.
RAPI_TW_F1 Timer W counts with internal clock φ.
RAPI_TW_F2 Timer W counts with internal clock φ/2.
RAPI_TW_F4 Timer W counts with internal clock φ/4.
RAPI_TW_F8 Timer W counts with internal clock φ/8.
RAPI_TZ_F1 Timer Z counts with internal clock φ.
RAPI_TZ_F2 Timer Z counts with internal clock φ/2.
RAPI_TZ_F4 Timer Z counts with internal clock φ/4.
RAPI_TZ_F8 Timer Z counts with internal clock φ/8.
RAPI_TRC_F1 Timer RC counts with internal clock φ.
RAPI_TRC_F2 Timer RC counts with internal clock φ/2.
RAPI_TRC_F4 Timer RC counts with internal clockφ/4.
RAPI_TRC_F8 Timer RC counts with internal clock φ/8.
RAPI_TRC_F32 Timer RC counts with internal clock φ/8.
RAPI_TRC_F40M Timer RC counts with internal clock φ40M.
RAPI_TRD_F1 Timer RD counts with internal clock φ.
RAPI_TRD_F2 Timer RD counts with internal clock φ/2.