Automatic keyboard, Additional precautions – Roland RG-7 User Manual

Page 8

Advertising
background image

7

IMPORTANT NOTES

Automatic Keyboard

Add

• While the automatic keyboard is in operation, avoid doing

anything that could hamper the action of the keys, such as
using undue force to press a key, or forcing up a
depressed key. By doing so, you risk causing malfunction.

Additional Precautions

551

• Please be aware that the contents of memory can be

irretrievably lost as a result of a malfunction, or the
improper operation of the unit. To protect yourself against
the risk of loosing important data, we recommend that
you periodically save a backup copy of important data
you have stored in the unit’s memory on a USB memory.

552

• Unfortunately, it may be impossible to restore the contents

of data that was stored on a USB memory and internal
memory once it has been lost. Roland Corporation
assumes no liability concerning such loss of data.

553

• Use a reasonable amount of care when using the unit’s

buttons, sliders, or other controls; and when using its jacks
and connectors. Rough handling can lead to malfunctions.

554

• Never strike or apply strong pressure to the display.

556

• When connecting / disconnecting all cables, grasp the

connector itself—never pull on the cable. This way you
will avoid causing shorts, or damage to the cable’s
internal elements.

557

• A small amount of heat will radiate from the unit during

normal operation.

558a

• To avoid disturbing your neighbors, try to keep the unit’s

volume at reasonable levels. You may prefer to use
headphones, so you do not need to be concerned about
those around you (especially when it is late at night).

559b

• When you need to transport the unit, pack it in shock-

absorbent material. Transporting the unit without doing
so can cause it to become scratched or damaged, and
could lead to malfunction.

560

• Do not apply undue force to the music stand while it is in

use.

562

• Use a cable from Roland to make the connection. If using

some other make of connection cable, please note the
following precautions.

• Some connection cables contain resistors. Do not use

cables that incorporate resistors for connecting to this
unit. The use of such cables can cause the sound level
to be extremely low, or impossible to hear. For infor-
mation on cable specifications, contact the manufac-
turer of the cable.

565

• Before opening or closing the keyboard lid, always make

sure that no pets or other small animals are located on top
of the instrument (in particular, they should be kept away
from the keyboard and its lid). Otherwise, due to the
structural design of this instrument, small pets or other
animals could end up getting trapped inside it. If such a
situation is encountered, you must immediately switch off
the power and disconnect the power cord from the outlet.
You should then consult with the retailer from whom the
instrument was purchased, or contact the nearest Roland
Service Center.

Before Using USB Memory

Using USB Memory

704 (revised)

• When connecting USB memory, make sure to press it until

it is fully inserted.

705 (revised)

• Never touch the terminals of the USB memory. Also,

avoid getting the terminals dirty.

708 (revised)

• USB memories are constructed using precision compo-

nents; handle the cards carefully, paying particular note to
the following.

• To prevent damage to the cards from static electricity,

be sure to discharge any static electricity from your
own body before handling the cards.

• Do not touch or allow metal to come into contact with

the contact portion of the cards.

• Do not bend, drop, or subject cards to strong shock or

vibration.

• Do not keep cards in direct sunlight, in closed vehicles,

or other such locations (storage temperature: 0 to 50˚
C).

• Do not allow cards to become wet.

• Do not disassemble or modify the cards.

Add

• Insert the USB memory in the Ext Memory port evenly

and without undue force. Forcing the USB memory may
damage the Ext Memory port.

Add

• Do not insert any object other than the USB memory (e.g.,

wires, coins, other types of disks, etc.) in the Ext Memory
port. This may damage the Ext Memory port.

Add

• Do not subject the Ext Memory port cover or connected

USB memory to excessive stress.

Add

• Close the USB memory cover when using the USB

memory for extended periods

RG-7_e.book 7 ページ 2005年2月14日 月曜日 午前9時45分

Advertising