RedMax BACKPACK BM461 - Manual (Page 9)

9
Never store chemicals in your sprayer for any length of
time
1. Before you remove cap, be sure there is no pressure in the
tank. in order to release pressure, invert unit upside down
and squeeze spray pistol (aim away from you). Pressure
will escape; when hissing stops, all pressure has been
released. Remove pump assembly by turning counter-
clockwise. The pump handle has two locking positions, one
turning clockwise and one counter-clockwise.
2. Remove cap and pour out remaining solution, then rinse all
parts thoroughly with clean water.
3. Add 1/2 gallon of fresh water in tank. Pressurize, and flush
pumping system by depressing trigger for at least two
minutes; then drain all remaining water.
4. Always store tank clean and empty in a dry, shaded
location.
WARNING
9. Storage
10. Disposal
When disposing your machine, or chemical, be sure to allow
your local regulations.
11. Parts list
BACKPACK SPRAYER
BM46I
NOTE :
1. Use RedMax/ZENOAH genuine parts as specified in the
parts list for repair and/or replacement.
2. RedMax/ZENOAH does not warrant the machines, which
have been damaged by the use of any parts other than
those specified by the company.
3. When placing parts orders for repair and/or replacement,
check if the model name is applicable to those specified
in the parts list, then use parts number described in the
parts list.
4. The contents described in the parts list may change due
to improvement.
5. The parts for the machine shall be supplied seven (7)
years after the machine is discontinued. [It is possible
that some specific parts may be subject to change of
their delivery term and list price within the limit of seven
(7) years after the machine is discontinued. It is also
possible that some parts may be available even after the
limit of seven (7) years.]