RGB Spectrum LES290A - Manual (Page 7)

RGB Spectrum, Inc. QuadView HD – Serial Server Set-up 7
Rev. 1 - 8/12/08
7. Connecting your serial control device to the Serial Server
Make the serial connection from the serial control device to the Serial Server.
a. The LES290A Serial Server comes with a DB25-M to DB9-M cable adapter, making the
LES290A Serial Server a DTE device, which will connect, directly to a DCE DB9-F serial
control device.
b. To connect the LES290A Serial Server to another DB9-M DTE device,
such as a PC serial port, you will need to use a DB26-F to DB9-F null modem cable.
Serial cables and adapters are available from many sources including BLACK BOX .
8. Connecting the Serial Server to the QVHD
a. If the connection from the LES290A Serial Server to the QVHD is over a network,
connect both devices to convenient hub, router, or switch ports with straight-through
Ethernet cables.
b. If the connection is point to point connecting only the LES290A Serial Server and the
QVHD, use a crossover Ethernet cable.
Notice: BLACK BOX is a registered trademark of Black Box Corporation.
RGB Spectrum
Corporate Headquarters – USA Corporate Headquarters – Europe
950 Marina Village Parkway Rootweg 24
Alameda, CA 94501 5721 VK Asten
Phone: 510-814-7000 The Netherlands
Fax: 510-814-7026 Phone: +32.11.515600
[email protected]
www.rgb.com