Speaker system connections – Regent Sheffield HT- 5OO User Manual
Page 6
IB-HT500-WM-E-080202
SPEAKER SYSTEM CONNECTIONS
Speaker System Connections
The speaker wires and connectors are color coded for easier set
up.
Connect the Front Left speaker to the FL terminals.
Connect the Front Right speaker to the FR terminals.
Connect the Center speaker to the C terminals.
Connect the Rear Left speaker to the RL terminals.
Connect the Rear Right speaker to the RR terminals.
Connect the Subwoofer to the SUB terminals.
Connect the supplied speaker system using the supplied
speaker cords by matching the colors of the terminals to those
of the cords.
IMPORTANT:
Before making connections, make sure the power is off. At the rear
of each supplied speaker you will find two spring type connectors
in different colors: a black one (-) and a red, blue or gray one(+).
(
The Subwoofer does not have spring type connecting tabs at the
rear, only a set of black & green speaker wires from its back.)
5
NOTE
In your package you will find 6 sets of colored wire pairs for connecting your Home Theater to the 6 different speakers included:
1 green and black pair of wires for the SP-6 subwoofer which comes out of the back of the subwoofer (12 1/2 feet long).
2 gray and black pairs of wires (26 feet long) for connecting the SP-5 rear speakers with gray and black terminals.
1 blue and black pair of wires (13 feet long) for the SP-5 center speaker with blue and black terminals.
2 red and black pairs of wires (13 feet long) for the SP-5 front speakers with red and black terminals.
(also included is 1 video cable for connecting to your TV sets Video Input jack)