ROTEL 7.1 Surround Sound Receiver RSX-1067 - Manual (Page 19)

19 English
All of the source inputs can be customized using
the ON-SCREEN DISPLAY configuration menus
to accept either analog signals or digital sig-
nals from one of the five assignable digital
inputs. When a digital input is assigned, the
RSX-1067 checks for the presence of a digi-
tal signal at that input. If a digital signal is present
when the source is selected, it is automatically
activated and the proper surround mode en-
abled. If no digital signal is present, the ana-
log inputs for that source are selected. This
auto-sensing is the preferred configuration for
digital source inputs such as DVD players.
When an ANALOG input is assigned, the unit
will not access a digital signal, even though
one may be available at the digital input.
By default, the source input buttons are fac-
tory configured to select the following inputs:
CD: Analog input
Tuner: Analog (built-in)
Tape: Analog input
Video 1: Digital Coaxial 1
Video 2: Digital Coaxial 2
Video 3: Digital Coaxial 3
Video 4: Digital Optical 1
Video 5: Digital Optical 2
Each source input should be configured us-
ing the ON-SCREEN DISPLAY menu system to
use the desired input type (analog or digital
auto-sensing). See the INPUT MENU section
for configuration instructions.
NOTE
: In addition to selecting analog or digital
signals, the configuration options also permit
custom labeling and selection of a default sur-
round mode for each of the eight inputs.
The input source buttons can also be used (with
the REC button described in the next section)
to select an analog input source signal to be
available at the outputs for recording. Addi-
tionally, the input source buttons can be used
with the ZONE button to select an analog input
source for ZONE 2.
Selecting a Source Input from
the Front Panel
To select a source for LISTENING: Press
one of the eight INPUT buttons or the MULTI
INPUT button.
To select a source for RECORDING: Press
the REC button and then press one of the eight
INPUT buttons within 10 seconds.
To select a source for Zone 2: Press the
ZONE button and then press one of the IN-
PUT buttons within 10 seconds.
NOTE : See the section on Zone 2 operations
for details of selecting a source for the re-
mote zone.
Selecting a Source from the
Remote
To select a source for LISTENING in the
main room: press and hold one of the DE-
VICE/INPUT buttons for more than one sec-
ond. To select the MULTI INPUT, press and hold
the EXT button.
NOTE : A short press of a DEVICE/INPUT but-
ton changes the remote control device only,
but does not change the source input.
To select a source for RECORDING: Press
the REC button. Then, press and hold one of
the DEVICE/INPUT buttons within 10 seconds.
Alternatively, you can press the REC button and
then use the +/– buttons to scroll through the
available source options. Select any input (CD,
TUNER, TAPE, or VIDEO 1–5). Selecting the
SOURCE option links the recording source to
the input selected for main room listening.
Whatever input is selected for listening is also
sent to the record outputs.
To select a source for Zone 2: Press the
ZONE button. Then, press and hold one of
the DEVICE/INPUT buttons within 10 seconds.
Alternatively, you can press the ZONE button
and then use the +/– buttons to scroll through
the available source options. Select any input
(CD, TUNER, TAPE, or VIDEO 1–5). Select-
ing the SOURCE option links the Zone 2 source
to the input selected for main room listening.
Whatever input is selected for the main room
is also sent to the Zone 2 outputs.
Selecting Digital Inputs
A default digital audio input can be specified
for each source input using the
Input Setup
menu. However, you can override the default
digital input for the currently selected source
by pressing the D-SLT button on the remote.
Each press of the button steps to the next digital
input in order: OPTICAL 1, OPTICAL 2, CO-
AXIAL 1, COAXIAL2, COAXIAL 3.
Overview of
Surround Formats
To get the best performance from your
RSX-1067, it helps to understand the many
surround sound formats available today, to
know which decoding process to use for a
particular recording, and how to select it. This
section provides basic background informa-
tion about surround sound formats. The follow-
ing sections provide detailed operating instruc-
tions for automatic and manual selection of
surround modes.
Dolby Surround
Dolby Pro Logic II
The most widely available surround sound
format for consumer audio/video is Dolby
Surround
® , available on nearly all commer-
cial VHS tapes, many television broadcasts,
and most DVDs. Dolby Surround is the con-
sumer version of the analog Dolby Stereo system
first introduced in the film industry in 1972. It
is a matrix-encoding system that records front
left, front center, front right, and a mono sur-
round channel into a 2-channel stereo record-
ing. During playback, a Dolby Pro Logic
® or
Pro Logic II decoder extracts each channel and
distributes it to the appropriate speakers.
The original Dolby Pro Logic decoder deliv-
ered a mono signal with reduced high-fre-
quency content to the surround speakers. A
more advanced decoder in the RSX-1067,
Dolby Pro Logic II, increases the separation
and frequency response of the surround chan-
nels for significantly improved performance
with Dolby Surround encoded recordings.
Dolby Pro Logic II decoding should be used
for any analog recording labeled “Dolby Sur-
round” or any Dolby Digital 2.0 soundtrack.
Dolby Pro Logic II does a superb job deriving
surround sound from conventional 2-channel
stereo recordings, using phase relationships
to extract front, right, center, and surround chan-
nels. A “music mode” makes Pro Logic II an
excellent choice for audio CDs.