RCA RD1090 - Manual (Page 7)

EN
Advanced Operation
7
Advanced Operation
8
DSP
• In Music mode, press DSP button
repeatedly to select among the DSP
modes:
FLAT > BASS > POP
TONE > JAZZ > ROCK
• In TONE mode, you may further adjust
BASS and TREBLE level.
Play modes
• In music mode, press MODE button
repeatedly during playback for the fol-
lowing playback modes:
Off (Normal playback) > Repeat One
> Repeat All > Shuffle
> Repeat
Shuffle > All Program > Repeat pro-
gram
> Normal.
Note: Plprogram and Repeat program
only appears if there are programmed
tracks.
Programming Tracks
1. Press ENTER in stop mode to enter
program mode. You will see ‘P’ icon
flashes on display, flashing ‘ - -’ for
track selection and ‘P01’ for program
list position.
2. Press or to select a track.
Selected track number will flash.
3. Press ENTER key upward/downward
to skip to the previous / next program-
ming position.
4. Press ENTER to confirm selection.
5. Repeat steps 2-4 for further selec-
tions. Maximum 20 selections can be
made.
6. Press STOP to exit programming
mode or unit returns to stop mode
automatically after 30 seconds if no
keys are activated.
Note: The player will enter Intro Play
mode and play the beginning of each
track as you scroll through tracks for
programming .
Editing program
Overwriting Programmed Tracks
1. In stop mode, press ENTER to enter
programming mode.
2. Push
or to select the pro-
grammed track you want to overwrite.
3. Push or to select the new
track you want to store.
4. Press ENTER to confirm selection.
5. Repeat steps 2 to 4 to overwrite addi-
tional programmed tracks.
Key Lock
To avoid accidental key activation, press
and hold the MODE button to lock keys.
“Locked” can be seen on display. press
and hold the MODE button again to
unlock keys.
File Download
This unit can be connected to the com-
puter. Please see Software Instruction
Manual for instructions to install USB
driver , music management software and
to transfer tracks to player and/or mem-
ory card.
Adjust Volume Level
Press + or - to adjust sound volume.
Refer to the volume level on display for
sound level.
>
>
RD1080 IB-EN US 7/23/02 5:36 PM Page 14