Redring 520M User Manual
Page 8
9. With an isolating valve connected, flush the
pipework through to remove particles etc.
before making the final connection to the
shower. A blockage in the waterways
(particularly the spray rings and filter) will
prevent the shower unit working properly.
10. The shower unit should only be used with
"Redring" recommended fittings.
Diagram 10
Diagram 11
Mains Supply
Hot supply
Isolating Valve
Isolating Valve
Drain Valve
Hot Water Cylinder
Other
draw-offs
Side entry
cylinder flange
(Essex flange)
Top entry
cylinder flange
(Surrey flange)
Cold water cistern
Dedicated cold supply taken below cold
water feed to hot water cylinder
Isolating
valves
Redring shower
unit and accessories
Mains Supply
Hot supply
Isolating Valve
Isolating Valve
Drain Valve
Hot Water Cylinder
Other
draw-offs
Cold water cistern
Dedicated cold supply taken below
cold water feed to hot water cylinder
Redring shower
unit and accessories
8
8cm min, 10m max
recommended
heights between
bottom of cold water
cistern and top of
shower unit
Isolating
valves
8cm min, 10m max
recommended
heights between
bottom of cold
water cistern and
top of shower unit