Features, Carrying handle, Miter table clamp – Ryobi P550 User Manual
Page 10: Spindle lock button, Switch lock, Fig. 3
10
FEATURES
CARRYING HANDLE
See Figure 2.
For convenience when carrying or transporting the miter
saw from one place to another, a carrying handle has been
provided on top of the saw arm. To transport, turn off and
unplug the saw, then lower the saw arm and lock it in the
down position. Lock saw arm by depressing the lock pin.
MITER TABLE CLAMP
See Figure 3.
The miter table clamp securely locks the saw at desired
miter angles.
SPINDLE LOCK BUTTON
See Figure 4.
A spindle lock button has been provided for locking the
spindle which keeps the blade in the saw from rotating.
Depress and hold the lock button while installing, changing,
or removing blade.
SWITCH LOCK
See Figure 5.
The switch trigger is equipped with a switch lock to reduce
the possibility of accidental starting.
To release switch lock feature:
n
Depress the switch lock (1).
�n While holding switch lock pushed in, depress the switch
trigger (2).
�n Release the switch lock (3).
n
NOTE: The spring loaded lock will spring back into the
switch lock position when switch trigger is released.
�
�
�
�
�
� �
� �
�
�
�����
����
��
��
�
�
�
�
�
� �
� �
�
�
�����
����
��
��
LOCK PIN
SAW ARM LOCKED
IN DOWN POSITION
CARRYING
HANDLE
5
0
1
3
Fig. 2
SAW ARM
LOCK PIN
MITER TABLE
CLAMP
(IN LOCKED
POSITION)
UNLOCK
LOCK
5
0
5
4
0
3
5
1
5
1
3
0
4
5
31.62
22.5
31.62
22.5
0
1
3
5
0
1
3
Fig. 3
3
0
1
5
0
1 5
3 0
4
5
31.62
22.5
22.5
SPINDLE LOCK
BUTTON
3
0
1
5
0
1 5
3 0
4
5
31.62
22.5
22.5
2
3
1
SWITCH
TRIGGER
SWITCH
LOCK
Fig. 4
Fig. 5