3recommended dimensions for user system mount pad, Figure 5 recommended dimensions for mount pad, 3 recommended dimensions for user system mount pad – Renesas QFP-64A User Manual
Page 13
Advertising
2.3
Recommended Dimensions for User System Mount Pad
Figure 5 shows the recommended dimensions for the mount pad (footprint) for the user system with
an IC socket for an FP-64A package (IC149-064-008-B5: manufactured by YAMAICHI
ELECTRONICS Co., Ltd.). Note that the dimensions in figure 5 are somewhat different from those
of the actual chip's mount pad.
Unit: mm
0.80 – 0.05
0.45
+ 0.1
- 0.05
0.8 x 15 = 12.00 – 0.1
0.8 x 15 = 12.00 – 0.1
14.80 (max.)
20.80 (min.)
0.80 – 0.05
Figure 5 Recommended Dimensions for Mount Pad
9
Advertising
This manual is related to the following products: