Roksan Audio Caspian FM TUNER - Manual (Page 9)

R E M O T E C O N T R O L C a s p i a n FM Tuner
The Caspian System Remote Handset uses two AAA size 1.5V batteries. These are housed in the battery
compartment on the underside of the handset.
Carefully remove the battery compartment cover and insert the supplied batteries in place observing polarity.
Replace the cover. The handset is now ready for use.
The front panel controls of the Caspian FM Tuner are replicated on the remote handset.
TYPE 1 TYPE 2 (optional)
1 MODE
2 STORE
3 TUNE
(-)
4 TUNE (+)
5 CHANNEL (-)
6 CHANNEL (+)
5
3
1
2
3
4
1
5
6
2
4
6
The TUNER functions on the System Remote Handset operate exactly as the front panel controls.
MODE:
A sustained press on this button will put the Tuner into and out of STANDBY.
A short press will put the Tuner into and out of Forced Mono.
TUNE: Press  and the Tuner will scan up the band, stop when it sees a usable signal, and automatically
tune it in.
Press  and the Tuner will auto seek by decreasing frequency.
CHANNEL: Use this key to select a channel with a previously stored station, or for storing a new one.
Press
 to increase channel number.
Press  to decrease channel number.
STORE: When you want to store a station:
Press STORE and the Channel Indicator will flash. Choose a channel using the CHANNEL keys and
press the STORE key again. The indicator will stop flashing and the station is now stored.
Roksan Audio ltd Caspian FM Tuner User Manual
CLASSIFICATION: General Use Version 1.01
All specifications are liable to change without notice. E&OE Page 9 of 11 ENGLISH