Roberts Radio RD-1 - Manual (Page 32)

Audio outputs (analogue)
Your radio has two analogue audio outputs:- Audio 1 outputs to your
radio's loudspeaker and to Audio output socket 1. Audio 2 outputs to
Audio output socket 2 and can be set to output a different station from
Audio 1 providing it is within the same multiplex.
Audio 2 setup - DAB
1. Press the Setup button to enter Setup menu.
2. Rotate the Tuning control until the DAB section appears between
the two black lines on the display. Press in and release the Tuning
control to confirm the selection
3. Rotate the Tuning control until the More... line is highlighted in the
display. Press in and release the Tuning control to confirm the
selection
4. Rotate the Tuning control until the Audio 2 line is highlighted in the
display.
5. Press in and release the Tuning control to enter station list/select
mode.
6. Rotate the Tuning control to select required DAB channel. Press
in and release the Tuning control to confirm the selection.
7. The station selected will be output to Audio output socket 2.
8. Repeatedly press and release the Setup button until the display
returns to show normal station mode.
Set-Up
Buzzer Alarm
Radio Alarm
Record Timer
AUTO
Set-up
1
Press
to select
TUNING
2
Set-Up
Record Timer
Clock
DAB
Display
Sleep
AUTO
DAB
Audio 2 Output
Show Audio2
No
...
AUTO
Press
to select
TUNING
4
Audio 2
Classic FM
TalkSPORT
Virgin Radio
AUTO
Press
to select
TUNING
6
31