Ryobi AG452 - Manual (Page 8)

8
FEATURES
Fig. 1
PRODUCT SPECIFICATIONS
Wheel Size ............................................................. 4 1/2 in.
Cord Length ...............................................................10 ft.
Arbor Size ................................................ 5/8 in. x 11 UNC No Load Speed .................................. 11,000 r/min. (RPM)
Input ............................... 120 V, 60 Hz, AC only, 5.5 Amps
Net Weight ................................................................. 5 lbs.
SPINDLE
LOCK
SIDE HANDLE
GUARD
LOCK-ON
BUTTON
90˚ ROTATING
HANDLE
KNOW YOUR ANGLE GRINDER
See Figure 1.
The safe use of this product requires an understanding of
the information on the tool and in this operator’s manual as
well as a knowledge of the project you are attempting. Before
use of this product, familiarize yourself with all operating
features and safety rules.
LOCK-ON BUTTON
The lock-on button is convenient for continuous grinding for
extended periods of time.
SIDE HANDLE
The side handle can be installed on the top, left, or right side
of the grinder, depending on operator preference, for stabi-
lization and must be used during all operations. In addition
to maintaining safe control during use, the side handle also
provides convenient ease of operation for the operator.
SPINDLE LOCK
The spindle lock keeps the spindle from turning while install-
ing and removing wheels and disks.
WRENCH STORAGE
The wrench can be easily stored in the side handle when
not in use.
90˚ ROTATING HANDLE
The handle rotates 90˚ to the l eft or right for ease of use.
WRENCH
STORAGE
WRENCH