Roberts Radio ecologic1 - Manual (Page 7)

If you need any further advice, please call our Technical Helpline on :-
020 8758 0338 (Mon-Fri)
Lock switch
The Lock switch is used to prevent unintentional operation of your radio.
1. Set the Lock switch located on the side of your radio to the 'Lock'
position . The power and all other buttons will be disabled,
this will prevent accidental operation when your radio is packed in a
suitcase or travel bag.
2. To release the lock, slide the Lock switch down to the 'Unlock'
position .
DC 7.5V 800mA
Using the AC adaptor
Your radio is supplied with a Mains Adaptor.
1. Place your radio on a fl at surface.
2. Insert the adaptor plug into the DC socket located on the left hand
side of your radio.
3. Plug the adaptor into a standard 13 amp mains socket outlet. Whenever
the adaptor is used with the radio, it will take power from the mains
rather than from the batteries.
The AC adaptor should be disconnected from the mains supply and
the radio when not in use.
• IMPORTANT: The mains adaptor is used as the means of connecting
the radio to the mains supply. The mains socket used
for the radio must remain accessible during normal use. In order
to disconnect the radio from the mains completely, the mains
adaptor should be removed from the mains socket outlet
completely.
6