Roland Digital Piano HP - Manual (Page 31)

31
Performing
Adding Reverberation to the Sound
The HPi-7F can apply a reverb effect to the notes you play on the keyboard. Applying reverb adds pleasing reverberation to what you play, so it sounds
almost as if you were playing in a concert hall.
1
1. Press the [Reverb] button .
The Reverb screen will appear.
MEMO
If you press the [Reverb] button once again, the button will go out and the reverb effect will be eliminated.
Adjusting the Reverb Depth
1
2
1. Press the [Reverb] button .
The screen will indicate the reverb depth.
2. Use the cursor up/down buttons to adjust the depth .
Higher values apply deeper reverb.
MEMO
• The adjusted setting will return to its original values when you turn off the power. If you wish, you can have this setting be retained even while the
power is turned off (p. 74).
• You can’t specify the depth of the reverb effect independently for each sound. Reverb is applied at the same depth for each sound.
• The depth of the reverb effect for the song that’s playing will not change.
• The reverb effect is not applied if Twin Piano mode (p. 37) is set to “individual.”