RCA 27993 - Manual (Page 6)

6
D
ESKTOP
I
NSTALLATION
1. Remove the battery compartment door on the handset, insert the battery
pack, plug the cord into the jack (inside the compartment), and replace
the compartment door.
2. Set the RINGER switch (on the handset) to ON, and place the handset in
the cradle on the base.
3. Plug the power supply cord into the power jack on the back of the base
and into an electrical outlet. The "charge/in use" indicator comes on,
verifying the battery is charging.
Allow the phone to charge for 12 hours prior to first use. If you don't
properly charge the phone, battery performance will be compromised.
4. Plug the telephone line cord into the TEL LINE jack on the back of the
base and into a modular phone jack.
CAUTION: Use only the ATLINKS USA, Inc. 5-2521 power supply that
came with this unit. Using other power supplies may damage the unit.
2
3
4
1