Ryobi CFS1502 - Manual (Page 8)

8
FEATURES
Fig. 1
PRODUCT SPECIFICATIONS
Sanding Pad Length..............................................5-1/2 in.
Cord Length ...............................................................10 ft.
Orbit Diameter ........................................................ 1/16 in. No Load Speed ............................................... 12,000/min.
Input ................................... 120 V, 60 Hz, AC only, 1 Amp
Net Weight.............................................................. 2.5 lbs.
KNOW YOUR COMPACT FINISH SANDER
See Figure 1.
Before attempting to use this product, familiarize yourself
with all operating features and safety rules.
ON/OFF SWITCH
This tool is equipped with a simple switch control. To turn the
sander ON, push the switch to the left
( | ). Push the switch
to the right ( O ) to turn the sander OFF.
QUICK CHANGE HOOK AND LOOP PAD
The hook and loop design allows for quick change of sanding
sheets and scrubbing pads. It also enables you to easily
clean and reuse them.
TRI-FLEX PAD DESIGN
The top two-thirds of each sanding sheet is a detachable
triangle that can be rotated to extend sheet life and promote
even wear.
CIRCULAR SANDING ACTION
The oscillating action of the sander produces very quick,
small circular motion of the sanding pad. The motion is ideal
for producing a fine finished grain or, when using the scrub-
bing pad, removing light rust, paint, and other build up from
the work surface.
DUST BAG
The dust bag collects dust through punched holes in the
sandpaper and hook and loop pad, keeping dust to a mini-
mum.
PAPER PUNCH
The paper punch template punches sandpaper for proper
fit and alignment.
GRIPZONE ™ OVERMOLD TECHNOLOGY
The sander features GripZone™ overmold technology for
improved comfort with a positive grip.
DUST BAG
PAPER PUNCH
HEAVY-DUTY SCRUBBING PAD
(RED)
LIGHT SCRUBBING PAD
(WHITE)
POLISHING PAD (GRAY)
SANDING SHEET
ON/OFF SWITCH