Radio Shack 43-222B - Manual (Page 8)

8
Wall Mounting
For wall mounting, you need two flat-head screws
(not supplied) with heads that fit into the keyhole
slots on the bottom of the base.
Drill two holes 2 5 / 8 inches (67 mm)
apart. Then thread a screw into
each hole, letting the heads ex-
tend about
5 / 32 inch (4 mm) from
the wall.
Align the keyhole slots with the
mounting screws and slide the sta-
tion downward to secure it.
5/32"(4 mm)
2 5/8"
67 mm)
5 /
32
"
2 5 /
8
"
43-222b.fm Page 8 Thursday, August 12, 1999 3:55 PM