Rockford Fosgate RFA-414 - Manual (Page 13)

WIRING THE PUNCH AUDIOphile System
+ – + – + –
> >
> >
> > + –
+ –
2x-4
Tweeter
Output Woofer
Output
Input
Input
from
Amplifier
RFA 44/54/64
ND-4
Note: With 12 dB per octave (second order filters) an out of phase
condition can exist within the passband. To correct this situation the
tweeters must be wired out of polarity. We recommend hooking it up out
of polarity first and then listening to the system. Next, reverse the polarity
and listen again. Select the one that sounds best. The polarity reversal
can occur at either the tweeter or crossover, whichever is most conve-
nient.
The following diagrams show some examples of how to wire the Punch
AUDIO
phile system.
10
2X-4