Rosen Entertainment Systems G10 - Manual (Page 16)

16
Rosen G10 Owner’s Manual
REPLACING HEADPHONE BATTERIES
The wireless IR headphones require two AAA batteries. To replace
the batteries, slide off the battery compartment door on the right
earpiece and insert batteries, as shown. Make certain that the battery
orientation matches the marks inside the battery compartment.
USING OPTIONAL WIRED HEADPHONES
There is a jack for wired headphones on the forward edge of the
unit, under a removable cover. When using optional wired head-
phones, only use headphones with a volume control, since the
system has no volume adjustment.
Mini-stereo Headphone Jack
LISTENING OVER THE CAR SPEAKERS
The system uses an FM Modulator (FMM) to send audio through the
vehicle radio and speakers. To listen over your speakers:
1 Make sure system MUTE is off. Press SPEAKER. “SPEAKER
SOUND ON FM _ _ . _” appears. (If “SPEAKER SOUND DIS-
ABLED” appears, select an FM frequency as described below.)
2 Turn on the car radio. Tune to the FM frequency displayed on the
screen, such as “FM 87.7”.
3 If no system audio is heard, try changing the FMM frequency and
re-tuning the radio to the new frequency.
To change the FM Modulator frequency:
Press SPEAKER. “Speaker Sound on FM _ _ . _” will be displayed.
Now use the Left and Right buttons to change the frequency. The
FMM frequencies are 87.7, 87.9, 88.1, 88.3, 88.5, 88.7, 88.9,
106.7, 106.9, 107.1, 107.3, 107.5, 107.7, and 107.9. After you
select a frequency, re-tune your radio and check for clear sound.
The system saves the frequency you select, and returns to it each
time the system is turned on. You may want to store the FM Modulator
frequency as a preset of your radio for ease of use.
Note: If there seems to be a strong station on the FM
Modulator frequency, and you are hearing a radio station
mixed in with the system audio, change the FM Modulator
frequency. Avoid frequencies used by local radio stations.
If the words “SPEAKER SOUND DISABLED appear, the Internal FMM is
turned off. It can be turned on by pressing the left or right arrow keys
and selecting an FM frequency. If the words “HEADPHONE SOUND
ONLY” appear, an external FM Modulator is probably being used. In
this case, the SPEAKER button turns the external FMM on and off.
The Rosen external FMM is uses either FM 87.9 or FM 88.3. If you
have any questions about your FMM, please ask your Rosen dealer.