RCA F36TF720 - Manual (Page 41)

Using the TV’s Features
Chapter 3 39
The choices and a brief explanation follow:
Not connected
Choose this if you don’t have this particular component
connected to the TV, or if you don’t want the TV to automatically tune to the
correct channel when you’re using this component.
Channel 2 (SAT/CABLE only) Component (satellite or cable box) is
connected to the CABLE/ANTENNA jack on the back of the TV, and you want
the TV to tune to channel 2 when you press the SAT• CABLE button on the
remote. Reminder: make sure the component’s Channel 2/3/4 switch is set to
channel 2. Usually this switch is on the back of the component.
Channel 3 Component is connected to the CABLE/ANTENNA jack on the back
of the TV, and you want the TV to tune to channel 3 when you press the
corresponding button on the remote. Reminder: make sure the component’s
Channel 3/4 switch is set to channel 3.
Channel 4 Component is connected to the CABLE/ANTENNA jack on the
back of the TV, and you want the TV to tune to channel 4 when you press the
corresponding button on the remote. Reminder: make sure the component’s
Channel 3/4 switch is set to channel 4.
Video Input 1 Component is connected to the INPUT1 VIDEO jack on the
back of the TV and you want the TV to tune to VID1 Input Channel when you
press the component button.
Video Input 2 Component is connected to the INPUT2 VIDEO jack on the
back of the TV and you want the TV to tune to VID2 Input Channel when you
press the component button.
Note: You should choose Video Input 1 or 2 for your VCR if you connected it to the
TV with audio/video cables.
1 Not connected
2 Channel 2
3 Channel 3
4 Channel 4
5 Video Input 1
6 Video Input 2
SET SAT/CABLE CHANNEL