RAD Data comm BLW-04EX - Manual (Page 46)

84
BLW-04EX
83
BLW-04EX
5. Click on the “IP Address” tab.
6. In the “Adapter” dropdown list, be sure your Ethernet adapter is selected.
7 . If “Obtai n an IP ad dress au tom ati cal ly ” i s al read y check ed, yo ur
computer is already configured for DHCP. Click “Cancel” to close each
window, and skip to “Step 2. Disable HTTP Proxy” on page 5-32. In the
“TCP/IP Properties” dialog box, click the IP address tab to locate your IP
Address, Subnet Mask, and Default Gateway. Record these values in the
space provided below.
2. Double-click the “Network” icon.
3. Click on the “Protocols” tab.
4. Double-click “TCP/ IP Protocol.”