Raypak 267 User Manual
Anything but basic, Optional d-2 power vent
D-2 Power Vent
Litho in U.S.A. ©2004-2008 Raypak, Inc. Catalog No. 6000.23D Effective: 10/01/08
For dimensions and technical specifications, see catalog number 6000.36.
In keeping with its policy of continuous progress and product improvement, Raypak reserves the right to make changes without notice
.
D-2 Power Vent
Sometimes, equipment rooms or unusual venting configurations require the use of a power
vent. Being the heater experts, we have this option for you when the need may arise.
Through-the-Wall Capable
The D-2 Power Vent assembly is a Category III mechanical draft venting system that operates
under a positive static pressure and prevents excessive condensate production in the vent. All
sizes are capable of relieving flue gases up to a maximum of 100 equivalent feet of vent
length. All models have a standard 4”-diameter exhaust connection.
Multi-Position
Using the Raypak-supplied adjustable 90° elbow, the flue gases may be discharged in any
direction (see D-2 Power Vent manual for details). The D-2 Power Vent is also dual-voltage
capable (120/240 volt) and engineered for long life and smooth operation.
Model
BTUH Input
207
199,500
267
266,000
337
332,500
407
399,000
Cabinet
•
Outdoor top - (standard)
•
Wind-resistant design
•
Channels rainwater out
•
Textured powder-coat finish
•
Optional indoor top
Digital Controls
•
Microprocessor-controlled
•
Built-in diagnostics
•
Backlit LCD display
•
Pool and spa settings
•
Lexan cover
•
Remote-compatible
Burner Tray
•
Easily removable
•
Stainless steel burners
•
Brass orifices
•
Aluminized metals
•
Stainless steel heat shield
•
Spark-to-pilot ignition
•
120/240V Combustion fan motor
Heat Exchanger
•
Integral copper fin tube -
•
(standard)
•
Automatic bypass
•
Unitherm governor
•
Polymer headers
•
Stainless steel tube sheet
•
Reversible for left-side
•
water connections.
•
ASME - (optional)
•
Cupro-nickel - (optional)
2” CPVC Connections
High Limits and Controls
•
Mounted on the in/out header
Ceramic Fiber
Combustion Chamber
Non-Combustible Base
•
Heater can be installed on a
•
combustible surface
120/240V
•
Incoming power can be
•
connected to the right or
•
left side.
Optional D-2 Power Vent
Anything But Basic
Raypak, Inc.
2151 Eastman Avenue, Oxnard, CA 93030, (805) 278-5300. Fax (800) 872-9725
www.raypak.com