RCA RS2042 - Manual (Page 12)

8
EN
CD Player
This unit is compatible with
CD-RW/ CD-R discs for
playback. Loading Discs
1. Press SOURCE repeatedly on the main unit or
CD on the remote control to select CD mode.
2. Press OPEN/CLOSE to open the disc
compartment.
3. Insert up to 5 discs with label face up.
4. Press OPEN/CLOSE
again to close the
disc compartment.
The occupied disc tray icons light and the current
disc number shows on the display.
Play and Pause Discs
• Press PLAY/PAUSE in stop mode to begin
playback.
• Press PLAY/PAUSE during playback to to
pause disc.Press again to resume.
Play and load simultaneously by:
1. Press OPEN/CLOSE to open the disc tray
while a CD is playing.
2. Load/change discs for available trays.
3. Press OPEN/CLOSE
again to close the
tray.
Stop Playback
During playback, press STOP to stop playback.
CD-R / RW
Notes on CD-R/RW Disc:
• Do not affix any type of labels to either
side (recordable or labeled side) of a
CD-R/RW disc as this may result in the
unit malfunctioning.
• To avoid damages to the CD-R/RW disc, do
not open the disc compartment door while
the disc is being read.
• Do not load an unrecorded CD-R/RW disc
into the unit. This may take a longer time
to read the disc.
• Playback capability for CD-RW discs
may vary due to variations in the
quality of the CD-RW disc and the
recorder used to create the disc.
Attention:
Do not push to force closing of the tray
during CD playback or tray opening.
Note:
Be sure to remove all discs from the disc
compartment before moving or transporting
the unit!
RS2042 EN 2/24/04 9:44 AM Page 13