RCA HD52W55 - Manual (Page 53)

Chapter 4 51
Using the TV’s Menu System
Signal Source
The Signal Source menu allows you to choose the source from which you
would like the signal to come: Cable Input, Antenna Input, or Video Inputs. The
same can be accomplished using the component buttons if you’ve set up Auto
Tuning on the remote or by pressing the INPUT button. But, if you misplace the
remote, this feature gives you another way to tune to a signal source.
Special Features 7
Ethernet Setup 8
Auto Tuning 6
Signal Type Video Input Setup 5
Signal Source 4
Software Upgrade 3
Channel Search 2
Signal Strength 1
Go Back 0
Main Menu Connections
You can select the Air/Cable setting for Antenna A and
Antenna B. Press OK to continue.
The component video (Y PB PR) connectors on the TV can
be changed to accept composite video instead. When using
composite video, connect the yellow RCA cable to the
Y/VIDEO connector on the TV.
Select the Input 2 video source:
Composite Video
Component Video (Y PB PR)
Special Features 7
Ethernet Setup 8
Auto Tuning 6
Video Input Setup 5
Signal Source 4
Software Upgrade 3
Channel Search 2
Signal Strength 1
Go Back 0
Main Menu Connections
Press OK to select the channel or input that is tuned when
the VCR key is pressed on the remote.
Select which input or channel should be automatically tuned
when a button listed below is pressed on the remote control.
RCA SAT2
Front Input
SAT-CABLE (Satellite or Cable Box)
Front Input
DVD
Front Input
VCR2 (AUX default)
Front Input
VCR
Front Input
AUDIO (Audio Receiver/Amp)
Front Input
Initial Volume 2
Maximum Volume 3
CableCARD Tools 4
Remote Setup 5
Text here Initial Channel 1
Go Back 0
Main Menu Connections Special Features
Press or to point to an option, then press OK to
select it. Press to return to the menu.
Select what should occur when power is restored to the TV:
Note: An Initial Channel setting of "On" will be enabled only
when the TV is plugged back in or electricity is otherwise
restored to the TV. Initial Channel is not enabled from the
turning on of the TV with the remote or front buttons.
On: Go to
On: Go to last input or channel selected
Off: Initial Channel is disabled
999 Channel Sub-channel 999
Cable Input
Special Features 7
Ethernet Setup 8
Auto Tuning 6
Video Input Source 5
Signal Source Signal Source 4
Software Upgrade 3
Channel Search 2
Signal Strength 1
Go Back 0
Main Menu Connections
You can select a source from the available signal sources.
Press OK to continue.
Use this screen if you have misplaced your remote control
and need a way to tune to a different antenna or to go to
the video inputs. Use the arrows to highlight the rectangle
then press OK or MENU-OK to scroll to the input you want.
Front Input
Video Input Setup
The Video Input Setup screen lets you choose which type of connection you’re
using for the Input 2 jack on the back of the TV. If you decide to change the
connection, you need to go back into the Video Input Setup screen and select
the corresponding option.
Auto Tuning
This menu lets you specify the various components you have connected to your
TV. It lets you program a component button on the remote control (AUX or
DVD) so that pressing the button automatically turns on the TV and turns the
TV to the correct Video Input Channel (go to Chapter 3 for detailed
information).
Notes: The AUX button by default is set up for a second RCA VCR. If you
need to reprogram the AUX button, or instead want to program the VCR
button, use the 2001 code. Then use the VCR2 option in the auto tuning
menu to set auto tuning.
The RCA SAT2 option doesn’t have a function for your remote.
Special Features
Initial Channel and Initial Volume are two special features that are mostly
intended for commercial/retail use.
Initial Channel You can select the tuner and channel or input that your
TV tunes to each time the TV is turned on by plugging it back in.
Initial Volume This feature works only if the Initial Channel feature is
set to On. Select the volume level that you want when the TV is turned on.
Maximum Volume This feature is intended to stop the volume from
being turned up too loudly. Set the volume at the loudest level you would
want to hear.
16339320.04 Menu 5/27/04, 4:03 PM 51